Components | GAS ANALYSIS TECHNOLOGY


Sample line

 

RSL-L / RSL-H 

Prefabricated sample lines with self-regulating heaters in different performance classes.

With this flexibility, a wide range of applications can be covered. The PTFE sampling tube is protected by an insulation and a polyamide 12 outer sheath. An application in a robust environment is possible.

DOWNLOAD Specification sheet: robecco Entnahmeleitung / sample line RSL-L / RSL-H

Information of temperature regulation (>>)

DOWNLOAD Specification sheet: robecco Temperaturregler | Heating regulation

RSL-L

– Individually customizable length of sample line, up to max. 100 m
– Self-regulating heating capacity: 20W/m
– Connection kit available, extras
– Assembly:
C- profiles with clips and counter part (BK42mm)
min. bending radius: 100 mm
min. assembly temperature: 0° C
fastening distance horizontal: max. 1,0 m // – vertical: max. 2,0 m

TECHNICAL DATA

Protective tube:
· Antistatic and UV resistant
· Very good cooling properties
· High, dynamic load-bearing capacity
· Halogen free and cadmium free
· Operating temperature range from -40°C up to + 90°C //
(for short periods 150°C)
PTFE- tube:
· Anti adhesive, chemical resistant
· Self-extinguishing UL 94 V-0
· Operating temperature range from -20°C up to + 260°C
· Tube diameter 4/6 mm and 6/8 mm available, 4/6 standart
· Compressive strength at 20°C: 4 mm – 12,0 bar
· Compressive strength at 100°C: 4 mm – 5,1 bar
Self-regulating heating tape:
· Max. allowable temperature: switched on 60°C
· Min. allowable temperature: -45°C
· Power supply: 230+/- 10%, further on request
· Temperature classification: T6 (85°C)
· Large range of approvals
· Adjusts to the heat capacity of the relevant work piece temperature
· Heating tape available at capacities of 10W/m; 20W/m,
30W/m or 40W/m
· If required, the line lenght can be adjusted at site
· No overheating on overlapping

RSL-H

– Individually customizable length of sample line, up to max. 60 m
– Self-regulating heating capacity: 45W/m
– Connection kit available, extras
– Assembly:
C- profiles with clips and counter part (BK42mm)
min. bending radius: 100 mm
min. assembly temperature: 0° C
fastening distance horizontal: max. 1,0 m // – vertikal: max. 2,0 m

TECHNICAL DATA

Protective tube:
· Antistatic and UV resistant
· Very good cooling properties
· High, dynamic load-bearing capacity
· Halogen free and cadmium free
· Operating temperature range from -40°C up to + 90°C //
(for short periods 150°C)
PTFE- tube:
· Anti adhesive, chemical resistant
· Self-extinguishing UL 94 V-0
· Operating temperature range from -20°C up to + 260°C
· Tube diameter 4/6 mm and 6/8 mm available, 4/6 mm standart
· Compressive strength at 20°C: 4 mm – 12,0 bar
· Compressive strength at 100°C: 4 mm – 5,1 bar
Self-regulating heating tape:
· Max. allowable temperature: switched on 120°C
· Min. allowable temperature: -45°C
· Power supply: 230 +/-10%, further on request
· Temperature classification: T3 (200°C)
· Large range of approvals
· Adjusts to the heat capacity of the relevant work piece temperature
· Heating tape available at capacities of 10W/m; 15W/m; 20W/m; 30W/m; 45W/m; 60W/m or 75W/m
· If required, the line lenght can be adjusted at site
· No overheating on overlapping