Sample probe equipment
Prefilter F-200-E5
Deflector
Sample pipe E
Prefilter serve as additional process filter and AS separation.
The pre filter can be protected against rough contamination of the process stream by usindg the deflector. The pre filter can be optimally placed in the process using the sample pipe.
DOWNLOAD Specification sheet:
robecco Sondenzubehör | sample probe equipmentTechnical data
Prefilter |
Prefilter F-200-E5 |
Maximum gas temperature Prefilter R-7 up to 550°C |
Material Stainless steel 1.4404 |
Size A-Ø=54 mm | I-Ø=50 mm | total =230 mm | Filter.=200 mm |
Connenction G 3/4″ male thread | wrench size 36 |
Filter porosity 5μm |
Order Numbers
Prefilter F-200-E5: | R002602 |
Sealing: | R000907 |
Deflector |
Deflector for F-200-E5 prefilter |
Material Stainless steel 1.4301 |
Dimensions A-Ø=65 mm |
Order Numbers
Deflector for F-200-E5: | R000800 |
Sample pipe | |
Sample pipe E-500 | Sample pipe E-1000 |
Length 500 mm | Length 1000 mm |
Maximum gas temperature 600°C | Maximum gas temperature 600°C |
Material Stainless steel 1.4571 | Material Stainless steel 1.4571 |
Size Outer diameter: max. 30 mm | Inner diameter: min. 24 mm | Size Outer diameter: max. 30 mm | Inner diameter: min. 24 mm |
Connection male thread G 3/4″ | female thread G 3/4″ | wrench size 36 | Connection male thread G 3/4″ | female thread G 3/4″ | wrench size 36 |
Order Numbers
Sample pipe E-500: | R000172 | Sample pipe E-1000: | R000171 |
Sealing: | R000907 | Sealing: | R000907 |