Sample line 
RSL-L / RSL-H 
Prefabricated sample lines with self-regulating heaters in di event performance classes.
With this exibility, a wide range of applications can be covered. The PTFE sampling tube is protected by an insulation and a polyamide 12 outer sheath. An application in a robust environment is possible.
RSL-L
| – Individually customizable length of sample line, up to max. 100 m – Self-regulating heating capacity: 17w/m; 23w/m; 31w/m – Connection kit available extras – Assembly: C- profiles with clips and counter part (BK44mm) min. bending radius: 100 mm min. assembly temperature: 0o C fastening distance horizontal: max. 1,0 m // – vertikal: max. 2,0 m |
TECHNICAL DATA
| Protective tube: · Antistatic and UV resistant · Very good cooling properties · High, dynamic load-bearing capacity · Halogen free and cadmium free · Operating temperature range from -40°C to + 90°C // (for short periods 150°C) |
| PTFE- tube: · Anti adhesive, chemical resistant · Serves the food quality (fully compliant with FDA requirements) · Not flammable · Operating temperature range from -70°C bis + 200°C (for short periods 260°C) · Tube available in diameters of 4 mm and 6 mm · Compressive strength at 20°C: 4 mm- 12,0 bar// 6 mm- 8,5 bar · Compressive strength at 100°C: 4 mm- 8,2 bar// 6 mm- 5,8 bar |
| Self-regulating heating tape: · Max. allowable temperature: switched on 85°C · Min. allowable temperature: -40°C (CENELEC -20°C · Power supply: 220-277V AC / 110-120 V AC 50 Hz · Temperature classification: up to 31W and/or 227V T4 (135°C) · Max. reststance of the protective braiding: ≤ 18,2O Ohm · Large range of approvals · Adjusts to the heat capacity of the relevant work piece temperature · Heating tape available at capacities of 17W/m; 23W/m or 31W/m · If required, the line lenght can be adjusted at site · No overheating on overlapping |
RSL-H
| – Individually customizable length of sample line, up to max. 100 m – Self-regulating heating capacity: 30W/m; 45W/m; 60W/m – Connection kit available extras – Assembly: C- profiles with clips and counter part (BK44mm) min. bending radius: 100 mm min. assembly temperature: 0o C fastening distance horizontal: max. 1,0 m // – vertikal: max. 2,0 m |
TECHNICAL DATA
| Protective tube: · Antistatic and UV resistant · Very good cooling properties · High, dynamic load-bearing capacity · Halogen free and cadmium free · Operating temperature range from -40°C to + 90°C // (for short periods 150°C) |
| PTFE- tube: · Anti adhesive, chemical resistant · Serves the food quality (fully compliant with FDA requirements) · Not flammable · Operating temperature range from -70°C to + 200°C (for short periods 260°C) · Tube available in diameters of 4 mm and 6 mm · Compressive strength at 20°C: 4 mm- 12,0 bar// 6 mm- 8,5 bar · Compressive strength at 100°C: 4 mm- 8,2 bar// 6 mm- 5,8 bar |
| Self-regulating heating tape: ·Max. allowable temperature: switched on 150°C ·Min. allowable temperature: -40°C ·Power supply: 220-277V AC; 50 Hz / 110V AC on request · Temperature classification: 200°C (T3) ·Max. reststance of the protective braiding: ≤ 18,2O Ohm ·Large range of approvals ·Adjusts to the heat capacity of the relevant work piece temperature Heating tape available at capacities of 30W/m; 45W/m or 60W/m ·If required, the line lenght can be adjusted at site ·No overheating on overlapping |
ORDER NUMBERS Choose your sample line according to your applications
Extras:
Connenction kit R000998
Adjustable heating line incl. temperature sensor
With use of an electronic control unit, a exible heating of the sample line can be achieved. For this purpose, the line is fed to another produc- tion step and a PT100 sensor is integrated. The desired temperature can be adjusted on the electronic control unit.
Heating regulator
for 
With the use of a electronic control unit, the sample line temperature can be setted.
Technische Daten
Heating regulatorThe desired temperature can be set manually |
| Compact design 2-line display ( nominal value and actual value) Compatible with various temperature sensors Multi-voltage input 4 – 20 mA output |
| Rated voltage 100- 240V AC |
| Switching power 1 Selctor 16A, 1 NC.switch 8A |
| Operating temperature -5 … +55°C |
| Temperature -200 … +800°C |
| Power consumption 4W |
| ATEX-certification on request |
Temperature sensor PT 100Sensor is integrated in the sample line |
| Up to 180°C 3-wire Flexible, with silicone connection cable |
| Rated voltage MAX. 60 V |
| Measuring range -50 … +180°C |
| Signal circuit max. 1 mA AC/DC |
| Sensor diameter 6 mm |
| Measurement system 3-wire |
| ATEX- certification on request |
