Components | GAS ANALYSIS TECHNOLOGY

Flow regulation 

Ball valve HV-K-3/2 | Regulation valve RV-K

The manually controllable ball valves and ow regulation valves are used for separation, regulation and control of gas flow in the analytics.

DOWNLOAD Specification sheet: robecco Strömungsregulierung | Flow regulation

Ball valve HV-K-3/2

❏ 3/2 way ball valve, horizontal, with angle drilling
❏ Regulating and separation of agressive gases
❏ Save & compact
❏ Material: PVDF
❏ High resistant for most aggressive media
❏ Easy installation wherever required
❏ Maximum tightness: Valve inlet made in one piece.
Simultaneous centering and sealing of the ball in the area of the connections.

Regulation valve RV-K

❏ Needle valve
❏ Regulating and stop valve of gases
❏ Save & compact
❏ Material: PVDF
❏ High resistant for most aggressive media
❏ Two-pieces hand wheel for non slip operation
❏ Zero dead space construction
❏ Marking of regulation valves via exchangeable rings in different colours (included in the scope of delivery)
Technical Data
Nominal diameter
DN 04
Dimension
d 49 mm x l 05 mm x w 49 mm
Connection
G 1/4″ female thread
Material
PVDF /FKM
Sealing sleeve made of PTFE
Valve inlet sealing
with O-Ring (FKM)
Pressure
10 bar
Temperature
max 120° C
Technical Data
Flow
2,2 l/min
Dimension
h 48,5 mm x l 51 mm x w 20 mm
Connection
4/6 mm pipe connection
Material
PVDF

Pressure
10 bar
Temperature
-20°C up to +100°C

Fixing set

❏ Clamp for wall mounting
Dimension
DN 20
Material
PP-Polypropylene

Mounting bracket

❏ Bracket for wall mounting
Dimensions
w 80 mm x h 50 mm x d 40 mm
Material
Galvanized steel
t=2 mm

Order numbers

Ball valve: HV-K-3/2R000121
Mounting set for ball valve HV-K-3/2:R000122
Regulation valve RV-K:R001284
Mounting bracket for RV-K:R001400